Incredable credentialing software
Login

Blog · Credentialing

Focused Professional Practice Evaluation (FPPE): Requirements and Triggers

November 5, 20266 min read
A senior physician proctor talks with a newly privileged surgeon as he scrubs in at a hospital scrub sink

Focused Professional Practice Evaluation (FPPE) is the process a medical staff uses to evaluate a practitioner’s privilege-specific competence when the practitioner lacks documented evidence of competently performing the requested privileges at that organization [1]. The Joint Commission’s standards FAQ, which covers both the Critical Access Hospital and the Hospital and Hospital Clinics manuals (last updated January 7, 2026), says a period of FPPE is required for all new privileges [1]. FPPE may also be used when a question arises about a currently privileged practitioner’s ability to provide safe, high quality care [1]. This guide covers when FPPE is triggered, what your FPPE process has to define, which data counts, and how FPPE differs from OPPE.

Last verified: October 30, 2026. Facts in this guide are cited to official Joint Commission standards FAQs and the eCFR, listed at the end.

When is FPPE required?

The Joint Commission FAQs cover the situations below [1][2]. Use this as a decision rule when a privilege request or a quality concern reaches the medical staff office:

SituationFPPE needed?Notes
New applicant granted privilegesYesA period of FPPE is required for all new privileges [1].
Existing practitioner requests a new privilegeYes, for that privilegeNewly requested privileges for current practitioners are covered too [1].
Temporary privileges for an important patient care needYesFPPE applies to temporary privileges granted for a limited period [1].
Board-certified or highly experienced applicantYesThere is no exemption based on board certification, documented experience, or reputation [1].
Concern about a currently privileged practitioner (“for cause” FPPE)May be usedFPPE may be used when a question arises about the practitioner’s ability to provide safe, high quality care [1]. OPPE review can also find a performance issue that requires a focused evaluation [2].

Board certification, experience, and reputation do not exempt anyone from FPPE [1]. How long and how closely the practitioner is monitored comes from your own pre-defined method [1]. For how verified credentials feed into privileging decisions, see credentialing vs. privileging.

When does FPPE start?

FPPE begins when privileges are granted, whatever the route: temporary, expedited, or full [1]. The FAQ’s example: if temporary privileges are granted July 1, 2021 and the governing body meets September 15, 2021, FPPE starts July 1, 2021 [1]. In practice, record the FPPE start date as the date privileges were granted, not the date the full approval cycle finishes.

What your FPPE process must define

The FPPE process must be pre-defined and implemented consistently for all newly requested privileges [1]. At minimum it defines [1]:

  • Criteria for performance evaluations.
  • The method for a monitoring plan specific to the privilege requested.
  • The method for determining how long monitoring lasts.
  • The circumstances that require monitoring by an external source.

Note the wording: the FAQ asks for a method to determine duration and does not itself set a number of cases or months [1]. The FAQ places the evaluation with the medical staff [1]. This is a summary of a Joint Commission standards FAQ, not legal advice; check the current manual for your accreditation program. The overview of Joint Commission credentialing standards puts FPPE in context with the rest of the Medical Staff chapter.

What data can an FPPE use?

The FAQ says both qualitative and quantitative criteria should be considered when designing the process. Its examples are not an exhaustive list [1].

Qualitative examples [1]Quantitative examples [1]
Description of procedures performedLength of stay trends
Periodic chart review (documentation quality, appropriateness of tests and procedures, outcomes)Post-procedure infection rates
Types of patient complaintsDating, timing, and signing of entries; T.O./V.O. authenticated within a defined time frame
Code of conduct breachesNumber of H & P / updates completed within 24 hours after inpatient admission or registration
Peer recommendations and discussion with others involved in the patient’s careCompliance with medical staff rules; core measures

Where the data can come from [1]:

  • Local activity is required. Data must include the practitioner’s activity at the organization where privileges were requested, and may include any location under the same CMS Certification Number (CCN).
  • System data can supplement. Multi-hospital systems with separate CCNs may use those entities’ data to supplement local data.
  • Low-volume practitioners. Supplemental data from another CMS-certified organization where the practitioner holds the same privileges may be used, but it may not replace a process to capture local data.
  • All settings in survey scope. FPPE applies to all settings in the scope of the hospital survey. Examples include on- and off-campus outpatient services, clinics, hospital-owned physician office practices, and free-standing emergency or urgent care centers.

FPPE vs. OPPE: what’s the difference?

QuestionFPPEOPPE
Who is evaluated?Practitioners with new privileges, or a privileged practitioner when a concern arises [1]All practitioners privileged under the Medical Staff chapter [2]
PurposeEvaluate privilege-specific competence [1]Identify practice trends that affect quality and safety [2]
How often?A period set by your pre-defined method [1]The organized medical staff sets data-collection frequency, but review of the data “cannot exceed every 12 months” [2]
Possible outcomesNot listed in the FPPE FAQ [1]No further action, a focused evaluation, revoking a privilege that is no longer required, or suspending a privilege; results are used to decide whether to continue, limit, or revoke privileges [2]

Scope note: this table is a summary, not legal advice. The FPPE column draws on the FPPE FAQ [1]. The OPPE column draws on the OPPE FAQ, last updated January 7, 2026 [2]. Check the FAQs for your own accreditation program.

The two connect: the OPPE FAQ lists a performance issue that requires a focused evaluation as one possible result of review [2]. For the ongoing side in detail, see OPPE: ongoing professional practice evaluation. For the periodic re-review of the credentials file itself, see our guide to recredentialing.

Does CMS require FPPE?

The Medicare hospital Condition of Participation for the medical staff does not use the term “FPPE” [3]. It requires an organized medical staff, under bylaws approved by the governing body, that is responsible for the quality of medical care [3]. It also says the medical staff must periodically conduct appraisals of its members [3]. The medical staff must also examine candidates’ credentials and recommend appointment to the governing body [3]. The regulation states no appraisal frequency [3].

A hospital’s governing body may choose to have its medical staff rely on a distant-site hospital’s or telemedicine entity’s credentialing and privileging decisions [3]. One condition: the hospital has evidence of an internal review of the practitioner’s performance [3]. It sends that information to the distant site for its periodic appraisal [3]. At minimum that includes all adverse events from the telemedicine services and all complaints the hospital received about the practitioner [3]. This is a summary of the regulation, not legal advice. More on hospital-side obligations is in hospital credentialing requirements.

FPPE checklist for the medical staff office

  1. Flag every new privilege at approval, including temporary and expedited grants, and record the FPPE start date as the date privileges were granted [1].
  2. Attach the privilege-specific monitoring plan, evaluation criteria, and duration method from your pre-defined process [1].
  3. Note whether the plan calls for an external reviewer [1].
  4. Collect local data, which can include any location under the same CCN, then add data from separately certified system hospitals only as a supplement [1].
  5. For low-volume practitioners, keep the local data capture process in place and document any supplemental data used [1].
  6. Route results to the reviewer your medical staff process names, and log the decision in the practitioner’s file.
  7. When an OPPE review finds a performance issue, open a focused evaluation and track it the same way [2].

Custom workflows and task tracking in Incredable

Incredable lets you create custom workflows that match your organization’s unique credentialing and compliance requirements. Its task management module lets teams assign, track, and complete tasks using a visual Kanban board. You can also gain insight into the credentialing process and the current status of key performance indicators through customizable reports tailored to your needs.

Sources

  1. The Joint Commission, Focused Professional Practice Evaluation (FPPE) – Understanding The Requirements (Critical Access Hospital and Hospital and Hospital Clinics, Medical Staff MS; last updated January 7, 2026). Verified October 30, 2026 against the archived copy of June 5, 2025.
  2. The Joint Commission, Ongoing Professional Practice Evaluation (OPPE) – Understanding the Requirements (Critical Access Hospital and Hospital and Hospital Clinics, Medical Staff MS; last updated January 7, 2026). Verified October 30, 2026 against the archived copy of June 21, 2025.
  3. eCFR, 42 CFR 482.22 Condition of participation: Medical staff. Verified October 30, 2026.
← All guides